Connections; Connecting The Monitors; Using Headphone/Earphones - Venturer PVS1950D Owner's Manual

Connecting the Monitors

• Use supplied EZ View cables to connect the monitor ports.
CONNECT TO
MAIN UNIT port
(Input)
Using Headphones/Earphones
• Turn down the volume before connection, and then adjust the level.
• When headphones are connected on Monitors, no sound will be output from the Monitor's speakers.
Caution:
• Avoid listening to sound at excessive levels which could be harmful to your ears.
Right side of unit
Note: In AV IN mode, headphones are connected on unit, no sound will be output from the unit.

CONNECTIONS

Monitors
EZ VIEW CABLES
Headphones/
Earphones
(3.5mm diameter plug)
E - 10
Connect to
MONITOR ports
(Output)
Main unit
Headphones/
Earphones
(3.5mm diameter plug)
Bottom of Monitor
CONNECT TO
MAIN UNIT port
(Input)