Trouble Shooting Guide - Venturer PVS1950D Owner's Manual

SYMPTOM
No power.
The remote does not
function.
DVD
No sound or only a very
low-level sound is
heard.
No picture.
The picture is not
clear.
Severe hum or noise is
heard.
The disc does not play.
Need More
Help?

TROUBLE SHOOTING GUIDE

CAUSE (AND REMEDY)
• Check that the Car plug adapter or AC adapter and AC power cord is connected.
• Turn on the unit.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the battery in the remote.
• Make sure that you've select DVD mode.
• The system is in pause mode or in Slow-motion Play mode. Press the
to return to normal play mode.
• Fast forward or fast reverse is performed. Press the
play mode.
• Make sure that AUDIO output and AV IN input connections are correct.
• The DTS DVD disc cannot be decoded for speaker output.
• This unit is too hot, shut off the unit for 30 minutes to cool down.
• The region number of the disc does not match the region number of the unit.
• DVD mode is not selected, select DVD on AV IN/DVD switch.
• Clean the disc.
• The disc is scratched.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
• There is no disc inside ("No Disc" appears on the Monitor screen).
• Insert the disc correctly with the playback side facing down on the disc tray.
• Clean the disc.
• A non-NTSC or PAL disc has been inserted. The Unit and disc region numbers are
incompatible. Press the TV MODE button on the remote to output the video signal.
• Condensation may have formed inside the Unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again
DO NOT RETURN THIS TO THE STORE
Please call Customer Service at 1-800-252-6123 (ET)
or visit online help at http://www.18002526123.com
E - 31
PLAY button
PLAY button to return to normal
811-195091-010
Printed in China