Related Manuals for DARCHE RANGER SOLO +
Summary of Contents for DARCHE RANGER SOLO +
- Page 1 R A N G E R S O L O I N S T R U C T I O N M A N U A L 050801183R D A R C H E . C O M . A U...
- Page 2 I N S T R U C T I O N M A N U A L CONTENTS • 1 x Ranger Solo + swag • 2 x Aluminium swag poles • 1 x 50mm high-density foam mattress • 1 x Dry roll bag •...
- Page 3 Prior to first use of the Ranger Solo + swag, it is important to remove the mattress from its compression sleeve and allow it to expand. Seasoning the swag is not essential but is recommended. For full instructions on seasoning your DARCHE swag, see How to Season Your Swag (page 7).
- Page 4 I N S T R U C T I O N M A N U A L Step 3 Before attempting to insert the aluminium pole into the second pin, ensure the pole sleeve is centred on the pole. Place you palm under the pole end, and push upward until there is a gap between the pole end and the second pin. Insert the second pin.
- Page 5 Step 5 Using the steel pegs provided, place one through the ring on the front of the swag and secure it to the ground. Then peg out each of the base corner rings to secure the swag to the ground. Insert a guy rope through the eyelet at the end of the swag, loop the guy rope around a steel peg and secure it to the ground.
- Page 6 I N S T R U C T I O N M A N U A L PACK DOWN 1. Partially close all the zips, door covers and window flaps, leaving them slightly open will allow for the air to escape while rolling up.
- Page 7 SPARE PARTS LIST For a full list of Spare Parts available refer to DARCHE.COM.AU HOW TO SEASON YOUR DARCHE SWAG The best way to season your swag is to set up outdoors and completely soak the exterior material of the swag with a hose.
- Page 8 M A N U A L Designed and tested in Australia for Australian conditions. A brand by Charles Parsons. Telephone 1300 367 695 l Email: info@DARCHE.com.au 75 Heyington Avenue, Thomastown VIC 3074, Australia. DARCHE: LEADERS IN OUTDOOR DESIGN. PROUDLY AUSTRALIAN.
Need help?
Do you have a question about the RANGER SOLO + and is the answer not in the manual?
Questions and answers