Table of Contents
Advertisement
DT-V2000SU
SPECIFICATIONS
Item
Content
Item
Content
•
Type
HD multi format monitor
Input terminals
Input A
Picture tube
20" measured diagonally, in-line gun,
RGB component multi input
90° deflection, dot-trio type (dot-pitch
1 line, BNC connector x 6
0.26mm)
(bridge connection possible and auto
Effective screen size
termination)
Width
16"(406.4mm)
Analog RGB
Height
12"(304.8mm)
R,G, B:
0. 7Vp-p, 75 Q
Diagonal
20"(508mm)
G on SYNC:
1.0Vp-p, 75 Q
(negative sync)
Scanning frequency
H
1 SkHz / 31 kHz~65kHz
Y/R-Y/B-Y component
V
50~100Hz
Y:
1.0Vp-p, ?SQ
(negative sync)
Video band
DC~60MHz(RGB)
R-Y/B-Y:
0. ?Vp-p, 75 Q
Horizontal resolution
480i (ITU-R BT.601-4)/480p(SMPTE293M)
NTSC
600TV lines
Y:
1.0Vp-p, 75 Q
1080i
900TV lines
(negative sync)
Pb, Pr:
0.7Vp-p, ?SQ
•
Power requirement
120V AC, 60Hz
Power comsumption
1.6A
720p(SMPTE296M)/1080i(SM PTE274M)
Y:
1.0Vp-p, 75 Q
Dimensions
18-3/4"
X
16-1/8"
X
20-718" inch
(3value sync)
{WXHXD)
476x407.5x529
mm
Pb, Pr:
0.?Vp-p, 75 Q
Weight
69.6Ibs (31.6kg)
External synchronization
Environmental
Operating temperature
EXT SYNC(HD/Cs, VD) input
conditions
0° ~40°C (32~104°
F)
1 line, BNC connector x 4
Operating humidity
bridge connection possible, auto termination
20~80%(non-condensing)
•
Horizontal/composite synchronization
Built-in speaker
3-1/8" (8cm) round type x 1
signal
lnpedance of 8 Q
HD:
1 ~4Vp-p, 75 Q
Cs:
1 ~4Vp-p, 75 Q
Remote input/output
1 line, DIN 8-pin connector x 1
Vertical synchronization signal
External input select control of 3 bits
VD:
1 ~4Vp-p, 75 Q
(Signal of 2 bits, ENABLE signal of 1 bit)
Input status output of 2 bits
Input B
(When both terminals are connected at the
~ame time, the Y/C terminals given priority)
VIDEO input
1 line BNC connector x 2
bridge connection possible, auto termination
•
1.0Vp-p, 75 Q (negative sync)
Y/C input
1 line mini-DIN 4-pin connector x 1
Y:
1.0Vp-p, 75 Q
(negative sync)
C:
0.?Vp-p, ?SQ
(burst signal)
Input C
PC (RGB) input
1 line, D-sub 3 row 15-pin connector x 1
exclusively for computer signal input
SYNC termination : 330 Q
AUDIO input
1 line, RCA pin x 1(monaural)
0.5Vrms, high-impedance
AUDIO output
1W(monaural)
Design and specification are subject to change without notice.
•
2
No. 51519B
Advertisement
Chapters
Table of Contents
