Advertisement
Quick Links
Current as of 06/30/2023
INSTRUCTION MANUAL
Nauticam EMWL Water Jacket Set
PN# 87520
FORWORD
Thank you for your purchase of a NAUTICAM
product.
At NAUTICAM, we pride ourselves in the ability to
recognize the requirements of professional as well
as amateur underwater photographers and fulfill
them through the innovative designs of our
products. We strive to achieve a high level of user-
friendliness by allowing stress-free installation and
easy operation of all important functions of the
camera.
Each product is individually inspected and water
pressure tested to ensure optimum quality.
Please read this manual carefully before using the
product, this will maximize its performance as well
as its lifetime.
Advertisement
Related Manuals for Nauticam EMWL
Summary of Contents for Nauticam EMWL
- Page 1 PN# 87520 FORWORD Thank you for your purchase of a NAUTICAM product. At NAUTICAM, we pride ourselves in the ability to recognize the requirements of professional as well as amateur underwater photographers and fulfill them through the innovative designs of our products.
- Page 2 Protect the interior from moisture with and/or placed within our products. and debris in order to prevent malfunction or NAUTICAM accepts no liability for any loss of leakage. captured images or the inability to capture images even if it is due to the malfunctioning of our •...
-
Page 3: Identification Of Parts
IDENTIFICATION OF PARTS # 87521 Water Jacket Body x 2 # 87521C Exchange special cap for Water Jacket use with 60° Objective Lens # 87522R Water Jacket Rear Gasket x 2 # 87522S Front Gasket for Straight Relay Lens # 87522C # 87522A # 87522B Front Gasket for... - Page 4 POSITION MAP OF PARTS Exchange this special cap on the original water jacket while using with 60 objective lens.
- Page 5 EMWL WATER JACKET SET WITH RELAY LENS ① Objective Lens 130° ② ④ ⑤ ④ ⑤ ⑥ Objective Lens 100°/160° Relay Lens Focusing Unit #1/2/3/4 ③ ⑦ Objective Lens 60° # 87522C Front Gasket for Objective130° Lens ① # 87522B Front Gasket for 160°/ 100° Objective Lens ②...
- Page 6 MOUNT WATER JACKET SET WITH RELAY LENS 1. Mount the WJ rear gasket onto EMWL focusing unit as shown. 2. Align the center cap of water jacket with the red button on focusing unit. Gently press the water jacket on top of the rear gasket until it goes all in.
- Page 7 MOUNT WATER JACKET SET WITH RELAY LENS 4. Align the “O" mark on the relay lens with the center cap of water jacket. Gently press the gasket on the relay lens into the water jacket (on focusing unit) until it is completely sealed.
- Page 8 MOUNT WATER JACKET SET WITH RELAY LENS 7. Place the EMWL set on a steady surface. Align the center cap of the water jacket with the red button on the relay lens. Gently press the water jacket into the water gasket until it is sealed evenly as shown.
- Page 9 MOUNT WATER JACKET SET WITHOUT RELAY LENS ① Objective Lens 130° ② ④ ⑤ Objective Lens 100°/160° ③ Focusing Unit #1/2/3/4 ⑦ Objective Lens 60° # 87522C Front Gasket for Objective130° Lens ① # 87522B Front Gasket for 160°/ 100° Objective Lens ②...
- Page 10 MOUNT WATER JACKET SET WITHOUT RELAY LENS 1. Mount the WJ rear gasket on EMWL focusing unit as shown. 2. Align the water jacket with the red button on the focusing unit, gently press the water jacket into the gasket until it is sealed evenly.
- Page 11 MOUNT WATER JACKET SET WITHOUT RELAY LENS 4. Align the “O" mark on the objective lens with the center cap of water jacket. Gently press the gasket (on the objective lens) into the jacket until it is sealed evenly. 5. Lift the cap of water jacket open and fill the water jacket with clean water.
- Page 12 MOUNT FRONT GASKET FOR 60° OBJECTIVE LENS 1. Unscrew the hinge of the water jacket cap and remove it. Gently pull out the cap from the water jacket. 2. Install the special cap to the water jacket and tighten it with the provided screw pin.
-
Page 13: Specifications
Materials: Silicone Rubber/Grey manuals. Dimensions: DIA72.40mm × 10.73mm Please refer to "Nauticam Product Care and #87521 Water Jacket Body Maintenance Guide" for more details. Aluminum Alloy with Hard Anodizing Materials: Surface Treatment Dimensions: DIA73.00mm ×...
Need help?
Do you have a question about the EMWL and is the answer not in the manual?
Questions and answers