E M W L Extended Macro Wide Lens User Manual Underwater Optics Introduction Package Contents Important Instructions Part Names Functions EMWL Lens to Lens Mount EMWL System to Lens Port Specifications Compatibility Care/Storage Warranty...
PACKAGE CONTENTS Make sure that you have all the included items listed below before using this product. If some items are missing or damaged, contact your local Nauticam dealer. There are 3 different EMWL set packages : EMWL Set #1...
IMPORTANT INSTRUCTIONS Water-tight test of the housing (without Do not use any kind of abrasive solution to camera inside) along with EMWL before clean the glass surfaces. usage is recommended. Do not expose the housing in direct Do not point of the lens directly towards sunlight for a prolonged period.
PART NAMES The Complete EMWL System Focusing Range Objective Lens 60° Focusing Unit #1 Lens Hood Index Mark Objective Lens 100° Relay Lens 150mm Focusing Unit #2 Lens Hood Index Mark Objective Lens 130° Focusing Unit #3 Lens mount release button...
FUNCTIONS * drawings as illustrations only Objective Lens 60° We recommand to set the desire focusing range before approaching the subject underwater. There are 3 focusing ranges that can be set and adjust in water : ∞-55mm 55mm-25mm 25-0mm...
Page 7
Camera Image Plane The EMWL objective lenses generate an inverted image, making the image appear upside down. The relay lens corrects the inverted image and relays the image back to the focusing unit and into the camera sensor. With Relay Lens...
Page 8
* drawings as illustrations only Air Release Ring The EMWL modular system is designed for exchangability underwater, each module can assemble and disassemble in water. When entering the water or each time after interchanging lenses, air bubbles might be trapped in between lenses.
Page 9
FUNCTIONS * drawings as illustrations only Filter Sleeve To prevent particles being trapped in between lenses in murky water, we suggest to wrap filter sleeve provided over the air release ring before going into bad water condition. The air release ring on/off position can function as usual after wrapping.
EMWL LENS TO LENS MOUNT * drawings as illustrations only The EMWL uses the Nauticam bayonet mounting system for assembling and disassembling. To Assemble To disassemble...
EMWL SYSTEM TO LENS PORT * drawings as illustrations only Before mounting the EMWL onto the lens port, it is necessory to first attach a M67 to bayonet converter (#83250). To attach M67 to bayonet converter macro port To remove...
COMPATIBILITY Focusing Units Camera Mount Camera Sensor Compatible Lenses Lens Port Nikon F mount #18702 N120 Nikon AF-S VR Micro Nikkor 105mm f/2.8G IF-ED Full Frame Macro Port 87 Nikon Z mount with FTZ #87201 Focusing Unit #1 #36163 N85 M4/3 mount M4/3 Olympus M.Zuiko Digital ED 60mm f2.8 Macro...
CARE/STORAGE Soak the housing system along with the Operate all controls and buttons at EMWL in fresh water after salt water least 3 times while immersed in fresh usage water We recommand cleaning and inspecting Protect the housing and lenses with...
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the own- er to carefully follow the instructions in our manuals.
Page 16
Nauticam Internationl Ltd. Rm 2203, CCT Telecom Bldg, 11 Wo Shing St, Fo Tan, Hong Kong Tel. +852 - 26902711 Fax. +852 - 26909778 URL. www.nauticam.com Gallery. www.nauticam.smugmug.com...
Need help?
Do you have a question about the EMWL and is the answer not in the manual?
Questions and answers