1. Manuals
  2. Brands
  3. Norton Clipper Manuals
  4. Saw
  5. C914P
  6. Owner's manual

Norton Clipper C914P Owner's Manual

Small push walk-behind saw
Hide thumbs Also See for C914P:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
SMALL PUSH
WALK-BEHIND SAW
Model: C914P | C914PK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C914P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Norton Clipper C914P

Summary of Contents for Norton Clipper C914P

  • Page 1 OWNER’S MANUAL SMALL PUSH WALK-BEHIND SAW Model: C914P | C914PK...

  • Page 2: Warranty

    WARRANTY Norton Clipper warrants the C914P and C914PK are warrantied against defects in workmanship or materials for a period of one (1) year from the original purchase date from Norton Clipper when used in commercial, institutional, rental, or professional use.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Warranty ............................1 Table of Contents ......................... 2-3 Safety Precautions ........................4-9 Hazard Icons .......................... 4 Safety Icons ..........................5 Dust and Silica Warning ......................6 Preparation ..........................8- Assembly ..........................8 Handlebar Assembly ......................9 Machine Lifting Points ......................10 Specifications &...
  • Page 4 TABLE OF CONTENTS Parts Breakdown .......................... 29- Depth Control and Depth Lock Group ..................30 Blade Guard and Water Control Group .................. 31 Blade Shaft & Engine Group ....................32 Main Frame and Pivoting Frame Group ................. 33 Belt Guard Group ........................34 Handlebar Group ........................

  • Page 5: Safety Precautions

    SAFETY PRECAUTIONS Important warnings and pieces of advice are indicated on the machine with icons. HAZARD ICONS Fuel (gasoline) is extremely flammable, and its vapors can explode if ignited. Store gasoline only in approved containers, in well-ventilated, unoccupied approved areas, and away from sparks or flames. Do not fill the fuel tank while the engine is hot or running.

  • Page 6: Safety Icons

    SAFETY PRECAUTIONS Important warnings and pieces of advice are indicated on the machine with icons. SAFETY ICONS Read operator’s instructions. Read OSHA and ANSI B7.1. Visit the industry safety page: www.safety.UAMA.org Eye protection must be worn. Ear protection must be worn. Hand protection must be worn.

  • Page 7: Dust And Silica Warning

    SAFETY PRECAUTIONS DUST AND SILICA WARNING Grinding/cutting/drilling of masonry, concrete, metal, and other materials can generate dust, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm. If you are unfamiliar with the risks associated with the particular process and/or material being cut or the composition of the tool being used, review the material safety data sheet and/or consult your employer, the material manufacturer/supplier, governmental agencies such as OSHA and NIOSH and other sources on...
  • Page 8 SAFETY PRECAUTIONS 1. Before mounting any blade on the saw, the blade should be inspected for any damage which might have occurred during shipment, handling, or previous use. 2. The blade collars & arbors should be cleaned and examined for damage before mounting the blade. 3.

  • Page 9: Preparation

    PREPARATION The C914P and C914PK are the same machine being the engine brand the only exception. The C914P uses a Honda GX270 9HP engine while the C914PK a Kohler 9HP CH395 engine. The compact concrete saws are shipped completely assembled and ready for use except for Handlebar, Diamond Blade, Gasoline, and Engine Oil.

  • Page 10: Assembly

    PREPARATION Engine On/Off Switch Water Tank Quick Detach Fittings ¾” Garden Hose Fitting Blade Guard Water “Y” splitter and Nozzles Quick Detach Water Fitting with Valve Handlebar Attachment Hardware Wrench and Wrench Holder Serial Number Plate Remove the saw from the pallet. Inspect the machine for concealed shipping damaged.

  • Page 11: Machine Lifting Points

    PREPARATION Lifting Points Never move or lift the machine with the engine running • Never lift the machine by the handlebars, pointer, water tank, blade guard, or hand wheel • Never transport any machine with the blade installed • DO NOT LIFT THE SAW BY THE HANDLEBARS Lifting Bale Lifting Point...

  • Page 12: Specifications & Features

    SPECIFICATIONS Dimensions/Weight C914P C914PK Length (Working) 57-55/64" (1,469) Length (Transport) 35-37/64" (929) Width 37-59/64" (963) Height 21-9/32" (541) Weight 169.4 (77) Engine Engine Mfg. Honda Kohler Model GX270 CH395 Manufacturers Spec No. GX270QXC PA-CH395-3149 Engine Type Single Cylinder 4 Cycle...
  • Page 13 SAE viscosity grades. Capacity of oil is 1.16 US quarts (1.1 liters) for Honda powered C914P and 1.4 US qt (1.3 liter) for Kohler powered C914PK models 2. Check Fuel: Fill if low. Use only unleaded gasoline with a pump sticker octane rating of 86 or higher is recommended.

  • Page 14: Operation

    1/8” (3.1mm) see Figure: Blade Installation for details. NOTE: Maximum 14” (350mm) Blade can be used with the C914P, if the blade does not fit under the Blade Guard, then the diameter is greater than 14” (350mm). ALL Diamond Blades have a direction of rotation indicated on the blade either, install the blade so that the direction of rotation is clockwise.

  • Page 15: Pointer Alignment

    8. Tighten the blade shaft nut (counterclockwise) securely against the outside collar. See Figure: Blade Installed on C914P/C914PK for details. 9. Lower the Blade Guard, verify that the Blade Guard Locking Pin Aligns with the Slot in the Blade Guard Bayonet and...

  • Page 16: Starting The Engine

    Always locate and properly mark all water, gas, and electrical services before beginning any work. Never transport any machine with the Blade installed. C914P Honda Powered C914P Honda Powered C914PK Kohler Powered C914PK Kohler Powered Move the Choke Control “L”...
  • Page 17 Console against the engine. Return gently to prevent damage to the starter. C914P Honda Powered C914PK Kohler Powered As the engine warms up, gradually move the choke lever Move the Fuel Control “L” To the OPEN Position. As the to the OPEN position.

  • Page 18: Water Supply

    Do Not Drink from The Tank Water Tank source: The C914P/C914PK saws included Water Tank is designed to provide dust control for when sawing Pressurized Water source is not available. The Water Tank also increases the machine overall weight which assist at cutting at deeper depths.

  • Page 19: Cutting Technique

    OPERATING THE SAW It is preferred to use the Pressurized Water source as it will provide the required water flow rates over a longer time period than the Water Tank. Please note that when using the Water Tank, it is recommended that the operator use an OSHA approved respirator to protect from Silica Dust.
  • Page 20 Incremental steps of 1-1/2 t o 2” until the desired depth of cut is reached. The C914P/C914PK has a 4-5/8” (117.5mm) with a 14” (355.6mm) blade many blades that are marketed as a 14” blade is 350mm (13-3/4”) which will produce shallower cuts due to the overall diameter NOT being 14”...

  • Page 21: Maintenance

    MAINTENANCE Honda Engine Maintenance Follow the below schedule for engine maintenance. NOTE: Check the Engine manual that shipped with the engine for any changes to the maintenance schedule. Or visit the engine manufacturer’s web site for details. If the charts have any differences, follow the chart in the Engine Manual. Norton does not warranty the engine.

  • Page 22: Kohler Engine

    MAINTENANCE Honda Engine Oil Viscosity vs. Ambient Temperature. Honda Engines Only. Always refer to the engine manual for more detailed information on air filters, checking/changing/filling oil, and fuel type to use. Use only Original OEM air filters. Do not clean the air filter with gasoline or other flammable solvents.

  • Page 23: Bearings

    MAINTENANCE Kohler Engine Oil viscosity vs. ambient Temperature. Dry Cutting Engine Maintenance • When operating the engine in dry cutting or dusty environments the following is required: • Engine oil changed more often. • Every 50 hours (or more often if conditions require) clean all the engine cooling fins.

  • Page 24: V-Belts

    The best tension for a belt drive is the lowest tension at which the belts will not slip under full load. Adjusting Belt Tension: The C914P/C914PK saw uses dual tensioning bolt system for the belt tensioning. The Belt Tensioning is made by two (2) pusher Screws which can be found in front of the Engine see Figure: C914P Belt Tensioning System for details.
  • Page 25 M10 Engine Mounting Bolts snug may allow the engine to twist in the mounting slots which may result in the pulleys becoming miss-aligned. 5. Loosen the two (2) M10 Jam Nuts on the C914P/C914PK Belt Tensioning with Assembly with a M17 Wrench (See Figure: C914P Belt Tensioning Hardware below).
  • Page 26 Cap Screws Clockwise to the same number of turns until the required amount of Belt Tension of 3/8” to ½” (9.5 to 12.7 mm) is achieved. (See Figure: C914P Belt Tensioning Jam Nut Direction). NOTE: Do not over tighten the belts as too tight of belts can break Engine Output Shafts, Blade Shafts, Belts, and cause premature Bearing Failures.
  • Page 27 MAINTENANCE To align the Pulleys: 1. Review the locations of the C914P/C914PK Belt Tensioning system before proceeding. (See Figure: C914P/C914PK Belt Tensioning System). 2. Remove the Belt Guard by loosening and removing the two (2) M10 Belt Guard Retaining Bolts.

  • Page 28: Depth Control

    MAINTENANCE Depth Control The depth control (raising screw) consists of a threaded rod, which feeds into a steel nut. In order to keep the two parts working smoothly it is necessary to keep the rod free from dirt and sludge as much as possible.

  • Page 29: Inspection And Cleaning

    MAINTENANCE Inspections and Cleaning For long life and better machine performance follow the inspection and cleaning schedule below. Inspect For Damaged or X Whole Machine Missing Components Clean Clean Blade Collars Check Belt Tension Clean Water Hose, Water Inspect Fittings, and Nozzles Grease Depth Screw Engine Clean...

  • Page 30: Parts Breakdown

    Any wear due to normal use of the machine will not be considered as a case of warranty for items designated as Wear Parts (W). For best performance and life Genuine Norton Clipper replacement parts should always be used. Changes to part specifications, are subject to change without notice.

  • Page 31: Depth Control And Depth Lock Group

    Part # Description Type 310004840 HAND WHEEL AND HANDLE 076357 310004966 HANDWHEEL NUT + BRAKE WASHER 076843 310004907 BEARING SKF FYTB 20 TF 076670 70184609004 RAISE SCREW (LIFTING) C914P/CS352 238982 70184609005 RAISE TUBE C914P/CS352 201903-048 70184643370 SPACER 28x22x22 048620 BBMSeries-Owner’sManual-Rev02-2023...

  • Page 32: Blade Guard And Water Control Group

    PARTS BREAKDOWN Blade Guard Group Blade Guard and Water Control Group Part # Description Type BLADE GUARD ASSY W/WATER CON C914P/CS352 70184609019 201903-078-1 FIT HOSE Y 310004233 072286 NOZZEL WATER (2) C/PC13 70184681299 082998 RING GUARD LOCK C20xx/C13xx/PC20xx 70184628501 238223...

  • Page 33: Blade Shaft & Engine Group

    NUT M10 1.5 LOCK 70184628215 239007 PULLEY KIT ENG C914P/CS352 70184609006 238989 BELT XPZ612 (Set of 3) 70184609009 238981 PULLEY KIT BLADE SHAFT C914P/CS352 70184609007 238995 BEARING SKF FYTB 20 TF 310004907 076670 70184609010 BLADE SHAFT C914P/CS352 201903-008 SCR M10 x 80 1.5 HEX HEAD CAP...

  • Page 34: Main Frame And Pivoting Frame Group

    SWITCH ENGINE ON/OFF HONDA GX390 - 2 Wire 70184603011 233938 For Kohler Engines order 70184674394 + 70184631616 WHEEL 4X1-1/2X3/4 FRT (1) 70184674102 227162 WHEEL FRONT C914P/CS352 KIT (1) 70184609014 238991 HOSE BLADE GUARD KIT C914P 70184609015 238992 310024053 GARDENA COUPLINGS C13...

  • Page 35: Belt Guard Group

    PARTS BREAKDOWN Belt Guard Group Belt Guard Group Part # Description Type -NA- 201903-077 GUARD BELT ASSEMBLY C914P/CS352 Handlebar Group Part # Description Type HANDLEBARS GRIPS 70184674393 227101 -NA- 201903-042 HANDLEBARS ASSEMBLY BBMSeries-Owner’sManual-Rev02-2023...

  • Page 36: Pointer (Guide) Group

    FRONT POINTER (GUIDE) ASSEMBLY C914/CS352 238997 Water Control Group Water Tank Group Part # Description Type WATER TANK COMPLETE CS451 CLIPPER 310351798 232356 HOSE BLADE GUARD KIT C914P/CS352 70184609015 238992 232121 GARDENA COUPLINGS C13 310024053 238067 REDUCER FIT 3/4MGH x 1/2FMPT 70184628020 70184682454...

  • Page 37: Decals

    227241 DECAL NOSE STRIPE C914P/C914PK -NA- 201903-090-1 DECAL BLADE GUARD EMEA -NA- 036058 DECAL NORTON CLIPPER LOGO 8.93x4.79 70184631637 233455 DECAL BLADE FAILURE WARNING 70184674659 227264 DECAL MODEL C914P OPP RIGHT -NA- 201903-093 DECAL PROPOSITION 65 WARNING 70184673104 108934 BBMSeries-Owner’sManual-Rev02-2023...
  • Page 38 PARTS BREAKDOWN Decals Part # Description Type Operator’s Left Side DECAL MODEL C914P OPP RIGHT -NA- 201903-094 DECAL DANGER LETHAL FUMES 70184674649 227243 DECAL CAUTION HOT SURFACE 70184674630 227235 70184674634 DECAL CAUTION DISCONNECT 227239 DECAL CLIPPER SMALL 4-1/8” x 2-1/2”...
  • Page 39 NOTES: BBMSeries-Owner’sManual-Rev02-2023...
  • Page 40 BBMSeries-Owner’sManual-Rev02-2023...

This manual is also suitable for:

C914pk

Table of Contents