JUKI JGW-01 Instruction Manual page 9

● Connection inside the electrical box of the sewing machine
Fig. 4: Figure showing how to remove the
electrical box cover
❸
❻
Fig. 5: Figure showing connection of the IoT
Gateway to the sewing-machine electrical box
❶
❷
CN52
❹
❺
1) Loosen four setscrews ❷ of control box
cover ❶ . Remove control box cover ❶ .
2) Connect Cobra junction cable SC ❹ (JUKI
part number: 40231236) to serial communi-
cation cable ❸ of the IoT Gateway.
3) Connect Cobra junction cable SC ❹ to the
CN52 located inside the electrical box.
4) Pass serial communication cable ❸ through
cord outlet plate ❺ as with other cables and
secure with cable clip band ❻ .
5) Install control box cover ❶ with four set-
screws ❷ .
For the purpose of preventing the
cord breakage, take care not to allow
the cords to be caught between the
control box and control box cover ❶
when attaching the latter.
– 7 –