Table of Contents
Advertisement
● How to set the production volume switch
Use the "Parameters for Prod(+) switch" to check and set the parameters of the production vol-
ume switch.
Settings of the production volume switch are as shown in the table given below.
Setting menu name
Sensor type
T1
T2
Refer to the section on the "Production volume count" in the "Instruction Manual for the IoT
Gateway middleware" for details of installation, etc.
● Completing the setting
At the end of the procedure, press the "submit" button to complete the setting.
Select one from the following three methods. Default is "BUTTON".
Pull-down menu name
BUTTON
IR Sensor(HAND)
IR Sensor(CLOTH)
For setting the minimum detection time of the sensor. (Unit: msec)
For setting the minimum counting-up interval time of the production volume.
(Unit: msec)
– 18 –
Description of setting
Description
Mechanical switch
Infrared sensor (for detecting hands)
Infrared sensor (for detecting fabrics)
Advertisement
Table of Contents
