Advertisement
10
4. Play after play and stop
In play after forward play and stop, the following opera-
tions are performed between
1-4) and 1-5) and 2-4) and
2-5).
1)
As the cam
gear ass'y (48) rotates, the boss (g)
moves aside the DPSS slider (47) to unlock the head
slider ass'y (37) put to the DPSS position and moves
the head slider ass'y (37) downward until it reaches
the position to which it was put immediately after
mounting of the cassette half (See Fig. 26 and 27.)
In play after reverse play and stop, the following
operations are performed after step 1) above.
Boss (g)
Cam gear ass'y (48)
5. Selection of Musical Piece
If the FF or REW button is pressed after the PLAY button
is pressed,
operations
of stop
after
play described
in
paragraph 3 above are performed. the combination head B
(4) is put to the DPSS
position.
High voltage (9~12V)
is applied to the reel motor ass'y (1B) and musical piece
selection is performed.
Fig. 27
2)
DPSS slider (47)
=—_—,
Unlocked by the boss (g) of
the cam gear ass'y (48).
As the head slider ass'y (37) is mvoed downward
until it reaches the position
to which
it was put
immediately
after mounting
of the cassette
half,
the reverse slider (46) is unlocked and the combina-
tion head B (4) is inverted from the reverse to the
forward direction.
Upon
this, the reverse slider (46) moves the R.H.
pinch
roller lever ass'y (6A)
to such a position
that the latter can be lifted by the head slider ass'y
(37). The reverse slider (46) moves the L.H. pinch
roller lever ass'y (6B) to such a position that the
latter cannot be lifted by the head slider ass'y (37).
©
on
Advertisement
