Advertisement
KN-S4W
5)
In addition
to the action described
in 3) above,
6)
As the cam gear ass'y (48) rotates as described in
the cam
lock ass'y lever (56) rotates the reverse
4) above, the cam portion (1) lifts the play lever
lever (57) counterclockwise.
After the voltage e4
(59) (See Fig. 9) and at the same time the auxiliary
is applied to the solenoid (L2) for the time tt,
coiled spring (31) pulls the head slider ass'y (37)
holding voltage e2 is applied. As a result, the cam
upwards. (See Fig. 10.)
lock ass'y lever (56) and reverse lever (57) are
held at that position.
(See Figs. 8, 14 and 15.)
Play lever (59)
Play lever (59)
Auxiliary coiled
spring (31)
Solenoid (L2
Cam gear ass'y (48)
Cam (i)
Cam gear ass'y (48) as
seen from rear
Fig. 9
lever (56)
Fig. 8
The cam gear ass'y (48) continues to rotate in forward
play mode. (In reverse play mode, the cam gear ass'y
(48) starts rotating after reversing.) This lifts the play
lever (59). The auxiliary coiled spring (31) on the boss
at the bottom of the play lever (59) pulls the head slider
ass'y (37) upwards.
Head slider ass'y (37)
"24
<
Play lever (59)
so
= a
Head slider ass'y (37) as
A
seen from head end
Fig. 10
Advertisement
