Advertisement
3. Stop after play
1)
3)
When
the stop button
is pressed with the deck
playing, electricity supplied, to the solenoid (L2) is
cut off. The cam
lock ass'y lever (56) is returned
in the direction (c) in Fig. 16 by the coiled spring
(53).
As a result, the boss (a) of the cam lock ass'y lever
(56) kicks the inner wall (f) of the cam gear ass'y.
As the cam gear ass'y (48) rotates a little, the gear
ass'y (9A) and the cam gear ass'y (48) starts rotating.
(See Fig. 7.)
The boss (g) of the cam gear ass'y (48)
;
pushes the DPSS slider to unlock the
As the cam gear assy (48) rotates, the boss (g)
head slider ass'y (37).
moves the play lock G lever (58) to unlock the play
lever (59). (See Figs. 24 and 25) As a result, the
Fig. 24
head
slider ass'y
(37)
moves
downward
and the
pinch roller moves away from the capstan. However,
the head slider ass'y (37) is hooked and stopped
by the portion (h) of the DPSS slider (47). (Earliest
stage in Fig. 26.)
At this position, the head can be depressed in DPSS
mode (music piece selection mode.)
Whenever forward or reverse play is performed after
mounting
of the cassette half, the mechanism
is
put to this position.
After release of the play lever (59), the cam gear
ass'y (48) rotates further. The wall (q) of the cam
Cam gear ass'y (48)
The boss (g) puts aside the play lock
i
gear ass'y (48) is forced against the boss (a) of
G lever (58) to clear the play lever (59).
oy
the cam
lock ass'y lever (56) and the notch
(k)
Fig. 25
in the gear of the cam gear ass''y (9A) is moved to
the gear position.
As a result, the cam gear ass'y (48) stops rotating.
Fig. 7 shows the locus of the boss (a) of the cam
lock
ass'y
lever
(56)
with
respect to the cam
gear ass'y (48).
After this, electricity supplied to the main motor
ass'y (1A) is cut off and the combination head B
(4) is put in the stop status at the DPSS position.
ee
a i t
Play lever (59)
Play lock G lever (58)
Fig. 26
Advertisement
