Subscribe to Our Youtube Channel
Related Manuals for Defender APEX
Summary of Contents for Defender APEX
- Page 1 APEX QUICK START GUIDE ATTENTION For Returns or Support you MUST contact DefenderCameras.com/Support...
-
Page 3: What You'll Need
WHAT YOU’LL NEED • TV or Monitor • Hammer Drill & Appropriate Bit • Phillips (#2) Screwdriver • Ladder (if required) • Cable Protectors (if required) WHAT’S INCLUDED MODEL: DV8MP1T4B4 • 1 x DVR Power Supply • 1 x DVR with 1 TB HDD •... - Page 4 4 CHANNEL DVR SETUP PLEASE READ FIRST! You must connect the DVR to a monitor/TV to complete the setup. We recommend verifying all accessories and completing the DVR setup before installing the cameras. For the best viewing experience, we recommend using a 4K TV or monitor to view the footage.
- Page 5 • Create your DVR password • PLEASE REMEMBER YOUR PASSWORD! Defender cannot remotely reset your password. Tip: It is recommended that the password be no less than 6 digits and should include numbers and letters. To add a capital letter, click Shift.
- Page 6 System Time. • Click “NEXT” NETWORK • In order to use the Defender Ultra App the DVR needs to be connected via Ethernet cable and the testing status needs to read OK for all settings. • Click “NEXT” to continue SUCCESS! YOUR DVR IS READY FOR USE •...
-
Page 7: Account Setup
MOBILE APP ACCESS • Please download the DEFENDER ULTRA APP and follow the steps to create an account. • An email account is required for verification. • This App is compatible with iOS 9+ and Android 4.1+ ACCOUNT SETUP Please Note: For all Android users, additional steps may be required. Please follow all steps to complete your set up. - Page 8 Create a username and password Account registration is complete! your email address. This may take for the app. Tap ‘Complete’ . Tap ‘Login’ to enter the Defender up to 5 minutes to receive. Please note the login password cannot Ultra app.
- Page 9 LOCATE YOUR QR CODE • Right click to select Main Menu > Advanced > Version Need Help? Visit DefenderCameras.com/support...
-
Page 10: Adding A Device
ADDING A DEVICE Tap + to add device. Tap ‘VIOT Station’ to add the DVR. Ensure the DVR is plugged into the wall. Tap ‘Next Step’. Tap ‘Next Step’. Scan the QR code. Tap ‘Add Device’. Need Help? Visit DefenderCameras.com/support... -
Page 11: Setting Up Notifications
SETTING UP NOTIFICATIONS MOTION DETECTION • To access this setting, right click to view the Main menu > Select Alarm > Motion Detect • Select the channel (camera) you wish to set/adjust motion detection settings. Or select All to adjust all cameras. •... - Page 12 APP SETTING FOR MOTION DETECTION Motion Detection settings must be enabled/changed on both your DVR and App Settings. Go to the device page and tap the Make sure ‘Unguard’ is in yellow, this means the notification is turned on. three dots. Please note: For Android users, the device management page is different and will read ‘Alarm’...
-
Page 13: Detection Region
DETECTION REGION Please note this setting is only available when motion detection is selected. Detection region allows your camera to notify you when motion is detected in the selected regions. If you wish to be notified of all motion in the cameras field of view, make no changes to this setting. •... -
Page 14: Using The App
USING THE APP Please Note: App screens below are for iOS. For all Android users, the screens may be different. HOME SCREEN LIVE VIEW Device Settings Scan QR Code HD/SD Display Mode Screen Recording Add Device Broadcast Motion Events Playback Device Information Snapshot Home Guard... - Page 16 ® ® or liable in any way for any damage, vandalism, theft or any other action that may occur while a DEFENDER ® product is in use by the purchaser. We reserve the right to change models, configuration, or specifications without notice or liability.
Need help?
Do you have a question about the APEX and is the answer not in the manual?
Questions and answers