Defender AL00009 Quick Start Manual

WRIST ALARM
Stylish Wrist Alarm

Introduction

The unique watch style design is unobtrusive to wear making it great for those that find clip on or
key ring alarms unsuitable. The Wrist Alarm has a powerful 130dBs siren to shock attackers. The
alarm has a highly durable 'one size fits all' Velcro strap which is easy to fit.

Operation of the alarm

1. To operate the alarm, simply push the button on the face of the alarm.
2. To stop the alarm sounding, push the button on the underside of the alarm.
Note:
Before using the Wrist Alarm for the first time please remove the plastic tab covering the batter-
ies by gently pulling it.

Battery replacement

It is recommended that the alarm is tested regularly. If the alarm sounds weak, the batteries should
be replaced. To replace the batteries, tear the Velcro apart (see image below) and remove the two
spring loaded pins. To remove the pins, pull the pin between the threads and the hole where the
pin fits. The pin will spring out. This gives you access to the back cover. Remove the four screws
from the back cover and replace the batteries noting the correct polarity. The unit operates by 2 x
LR44 (or equivalent) button batteries. Then put the screws and the pins back in place.
Tear the
Velcro apart

WARNING

The high output siren fitted to this quality personal alarm may cause ear damage if used at
close range for a prolonged period of time.
Keep away from children and pets ears
This product is designed for use as a deterrent; it does not guarantee protection or personal
safety.
defendersecurityproducts.co.uk
Remove the 2 spring
loaded pins to gain
access to the back
cover
Remove the screws
to replace batteries
.
Product Code: AL00009
Positive Pole (+)
Negative Pole (-)