D-Sub Pin Distribution - AOC TV2764W-2E Service Manual

3. D-SUB PIN DISTRIBUTION

This procedure gives you instructions for installing and using the LCD TV display.
1.
Position the display on the desired operation and plug the power cord into a convenient AC outlet.
Three-wire power cord must be shielded and is provided as a safety precaution as it connects the
chassis and cabinet to the electrical conduct ground. If the AC outlet in your location does not have
provisions for the grounded type plug, the installer should attach the proper adapter to ensure a safe
ground potential.
2. Connect the 15-pin color display shielded signal cable to your signal system device and lock both
screws on the connector to ensure firm grounding. The connector information is as follow:
PIN NO.
1
2
3
4
5
6
7
8
3. S-Video (Y /C):
SCART:
TV:
AV1:
Audio:
PC Input audio:
Audio Input for AV1, S-Video, SCART Video
Headphone
Audio line Out (to another speaker)
4.
Apply power to the display by turning the power switch to the "ON" position and allow about ten seconds
for Panel warm-up. The Power-On indicator lights "GREEN" when the display is on.
5. With proper signals feed to the display, a pattern or data should appear on the screen, adjust the
6
11
15 - Pin Color Display Signal Cable
DESCRIPTION
Red Video
Green Video
Blue Video
GROUND
GROUND
Red Video Ground
Green Video Ground
Blue Video Ground
TV rear side
TV rear side
TV rear side
TV rear side
TV rear side
3.5mm Stereo female
3.5mm female
1
5
10
15
PIN NO.
9 Mandatory +5V Supply for PC Bypass
10
11
12 Bi-directional Data (SDA) for PC Bypass
13 Horizontal Sync.
14
15 Data Clock (SCL) for PC Bypass
: 4 pin Mini-DIN female
: RCA female
: IEC type female
: RCA female (Yellow)
: RCA female (Red / White)
: RCA female (Red / White)
: RCA female (Red / White)
10
DESCRIPTION
Sync. Ground
GROUND
Vertical Sync.