D-Sub Pin Distribution - AOC PB20C Service Manual

This procedure gives you instructions for installing and using the LCD TV display.
1. Position the display on the desired operation and plug the power cord into a convenient AC outlet. Three-wire power
cord must be shielded and is provided as a safety precaution as it connects the chassis and cabinet to the electrical
conduct ground. If the AC outlet in your location does not have provisions for the grounded type plug, the installer
should attach the proper adapter to ensure a safe ground potential.
2. Connect the 15-pin color display shielded signal cable to your signal system device and lock both screws on the
connector to ensure firm grounding. The connector information is as follow:
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
3. S-Video (Y/C):
SCART 1:
AV1:
Audio:
PC Input audio
Headphone
Audio line Out (to another speaker)
4. Apply power to the display by turning the power switch to the "ON" position and allow about ten seconds for Panel
warm-up. The Power-On indicator lights "GREEN" when the display is on.
5. With proper signals feed to the display, a pattern or data should appear on the screen, adjust the brightness and
contrast to the most pleasing display, or press Auto-adjust to get the best picture-quality.
6. This TV (with PC function) has power saving function following the VESA DPMS. Be sure to connect the signal cable
to the PC.
7. If your TV requires service, it must be returned with the power cord.

3. D-SUB PIN DISTRIBUTION

6
11
15 - Pin Color Display Signal Cable
DESCRIPTION
RED Video
GREEN Video
BLUE Video
TXD (for ISP)
Ground
Ground-R
Ground-G
Ground-B
TV rear side
TV rear side
TV rear side
TV rear side
1
5
10
15
PIN NO.
9.
10.
11.
12.
13.
14.
15.
: 4 pin Mini-DIN female
: SCART female
: RCA female (Yellow )
: RCA female (Red / White )
: 3.5mm Stereo female
: 3.5mm female
: RCA female ( Red / White )
4
DESCRIPTION
NC
Sync Ground
RXD (for ISP)
Serial Data for DDC
HORIZ. SYNC
VERT. SYNC
Serial Clock for DDC