Table of Contents
Advertisement
6.3.3
Maintenance indicator
The maintenance symbol is displayed when
maintenance is required.
Contact your specialist dealer.
6.3.4
Battery error message
The battery indicates errors with different LED
statuses.
.
Type
Status
System error
Communication error with
the pedelec system.
Temperature protection
If the temperature exceeds
the guaranteed operating
range, the battery will
switch off.
Error during security
This is displayed if no
authentication
original drive unit is
connected. This is
displayed if one of the
cables is not connected.
Charge error
This is displayed if an error
occurs during charging.
Battery malfunction
Electrical fault in the
battery.
Table 29: Battery error messages
MY22K03 - 12_1.0_13.08.2021
Figure 60: Maintenance symbol indicator
Symbols:
LED on
Lighting pattern
Remedy
1
Check that the charging cable is firmly and properly
connected.
2
Contact your specialist dealer if the problem persists.
1
Store battery in a cool place where there is no direct
sunlight until the battery interior temperature has
fallen sufficiently.
2
Contact your specialist dealer if the problem persists.
1
Connect original rechargeable battery and original
drive unit.
2
Check state of cables.
3
Contact your specialist dealer if the problem persists.
1
Remove connector between battery and charger.
2
Press the On-Off button (battery) while the battery is
connected.
3
Contact your specialist dealer if the problem persists.
1
Connect charger to the battery.
2
Remove charger.
3
Press the On-Off button while the battery is
connected.
4
Contact your specialist dealer if the problem persists.
1
5
LED off
Operation
LED flashing
67
Advertisement
Table of Contents
