Table of Contents
Advertisement
FILLING THE DETERGENT AND ADDITIVES
Always follow the instructions that you find on the packaging of the detergent products, but
we recommend that you do not exceed the maximum indicated level (
however guarantee the best washing results.
After a washing cycle, if necessary, remove any detergent residue from the detergent
dispenser.
CHECK THE POSITION OF THE DETERGENT
FLAP
1. Pull out the detergent dispenser until it stops.
2. Press the lever down to remove the dispenser.
3. To use powder detergent, turn the flap up.
4. To use liquid detergent, turn the flap down.
With the flap in the position DOWN:
18
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives (fab-
ric conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
•
Do not use gelatinous or thick liquid
detergents.
•
Do not exceed to liquid detergent dose
indicated on the flap.
•
Do not set the prewash phase.
•
Do not set the delay start function.
5. Measure out the detergent and the fabric
conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause a blockage
when you close the drawer.
SETTING A PROGRAMME
1. Turn the programme dial to select the desired
washing programme.
The indicator of the Start/Pause
The display shows an indicative programme
duration.
). This quantity will
button flashes.
Advertisement
Table of Contents
