Tips And Assistance; Table 3 Frequent Asked Questions (Faqs) - G-Tek LM Pro T051 Operating Manual

7 T A
IPS AND SSISTANCE

Table 3 Frequent Asked Questions (FAQs)

Questions
How to view/set current UTC
time?
Device is not connected in
software application.
For how much time, the
display remains ON after
device activation?
How display indicates for both
single and cumulative alarms
triggered?
If user does not want to
configure all alarms?
Page 24
Possible Cause/ Solution
▪
Connect the device with LMViewE051 application, the
software window will show current reading along with
UTC time.
▪
User can set/update the UTC time by configuring the
batch and syncing the current time with PC clock.
▪
See that during insert of device in USB port of PC, both
status LEDs blink together once.
▪
Try to reconnect in USB and LMViewE051 software.
▪
USB port might be faulty, try with other port of PC.
▪
In case of USB Type C port, use USB Type C to Type A
female cable for connecting the device.
▪
Display turns off after 1 minute of activity if LCD is
configured as Auto OFF in batch configuration.
▪
The display is normally off to save the battery life when
no activity on device.
▪
In case of both single and cumulative alarm High
and Low triggered, all 3 arrows will be
displayed for high /low alarm condition.
▪
User will have to configure all the alarms , the alarms not
required by user can be set to Highest and lowest
settable setpoint.