Battery Disposal; Figure 18 Battery Replacement Steps - G-Tek LM Pro T051 Operating Manual

3. Insert the battery (3 V coin cell, CR2032) in a way that the positive terminal of battery is
visible.
4. Place the cover back on the battery compartment in arrow matching position and close
it by turning in clockwise direction till both the arrows do not match as shown in below
image:
➢ The data logger's display turns ON and Both Status LEDs blink one time.
➢ Battery replacement stops a measurement that is currently running. However, stored
measurement data are preserved.
➢ When new battery is inserted, the min/max value for the current data will be calculated
from that time onwards and batch recording is resumed.
Note: It is advisable to reconfigure the data logger after changing the battery.

6.4 Battery Disposal

➢ Dispose or recycle the battery in accordance with your local regulations.
➢ Do not expose the Data Logger to extreme temperatures as it may lead to the destruction
of the battery and may cause injuries.
"Warning, Battery may explode if mistreated. Do not recharge,
disassemble, or dispose of in fire."
"Warning, Battery may explode if mistreated. Do not recharge,
dissemble or dispose of in fire."
"Warning, Battery may explode if mistreated. Do not recharge,
Page 23
dissemble or dispose of in fire."

Figure 18 Battery replacement steps