STIEBEL ELTRON WPL 15 A2W Premium Quick Start Manual

STIEBEL ELTRON WPL 15 A2W Premium Quick Start Manual

Air-to-water heat pump with integral tank
Hide thumbs Also See for WPL 15 A2W Premium:

Advertisement

Quick Links

QUICK-START GUIDE
Air-to-water Heat Pump with Integral Tank
» WPL 15/25 A2W Premium & HSBC 300 Integral

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WPL 15 A2W Premium and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for STIEBEL ELTRON WPL 15 A2W Premium

  • Page 1 QUICK-START GUIDE Air-to-water Heat Pump with Integral Tank » WPL 15/25 A2W Premium & HSBC 300 Integral...
  • Page 2: Table Of Contents

    Overview AF PT Outdoor Sensor Overview ������������������������������������������������������2 WPL 15 A2W Premium & WPL 25 A2W Premium ���������� 2 The AF PT outdoor sensor is a PT1000 sensor in a housing designed HSBC 300 Integral ����������������������������������������������� 2 for mounting on an exterior wall. This sensor is needed for ambi- FET ������������������������������������������������������������������...
  • Page 3: Hydronic/Dhw Connection

    Installation Hydronic/DHW Connection Note f Install a ribbon heater when using the T-support. 2.2.1 WPL 15/25 A2W Premium The WPL has a water inlet and a water outlet connection. These Material losses are 28 mm quick-connect fittings. Adapters are provided with the WPL to accommodate adapting to 1˝...
  • Page 4: Electrical

    MCB/fuse rating Assignment Wire size connection accessory kit (RBS-SBC Integral) is also available which 1x B 20 A (WPL 15 A2W Premium) X3 - Compressor AWG 10 repositions the DHW connection point to the top of the HSBC. An 1x B 35 A (WPL 25 A2W Premium)
  • Page 5: Commissioning

    Commissioning Commissioning Hydronic 15A/240V Circuit Material losses HSBC Junction Box The hydronic system must contain at least 25% glycol. This is necessary to provide adequate freeze protection and to inhibit corrosion on internal components in the WPL and HSBC. Note Terminal Control voltage Wire size...
  • Page 6: Dhw

    HBSC should illuminate and show the Y Heating circuit 1, heat pump return temperature, °F (°C) Stiebel Eltron logo. Once fully booted, you will be prompted with a few setup prompts. f Enter this number into the parameter HEATING CURVE RISE by navigating to Settings >...
  • Page 7: Operation

    Pump > Process Data, respectively. If you are not able to resolve a problem please contact us toll free at 800.582.8423. Stiebel Eltron is happy to provide technical assistance. In most instances, we can resolve the problem over the phone.
  • Page 8 Kapinakuja 1 | 04600 Mäntsälä Poland United Kingdom and Ireland Tel. 020 720-9988 | Fax 020 720-9989 STIEBEL ELTRON Polska Sp. z o.o. ul. STIEBEL ELTRON UK Ltd. info@stiebel-eltron.fi Instalatorów 9 | 02-237 Warszawa Tel. 022 Unit 12 Stadium Court www.stiebel-eltron.fi...

This manual is also suitable for:

Wpl 25 a2w premiumHsbc 300

Table of Contents