What you will need
1.
Coax jumper for connecting bias tee to radio.
2.
Coax cable for connecting bias tee to loop antenna
3.
This antenna uses SO-239 connectors. If your
receiver uses BNC or other connectors, you will
need an adaptor.
on™ coax Cable
os)
DC PASS —>
3
DC BLOCK
—>
TOP P eee eee eee
12 VDC
@ DO NOT Transmit into the MFJ-1886 ©
™ Transmitting into the Loop will cause
:
)
i
permanent damage.
|
BEEBE BRB
RRP
eee
Receiver
Mounting
Use the two supplied u-bolts
to secure the loop to your
mast as shown. Your mast
should be no more than
1-3/4 in diameter and should
be sturdy enough to support
Side view
the MFJ-1886 antenna.
Customer supplied tripod or mast