Three Way Call; Register Interval Time; Caller-Id Block - UTStarcom F1000 User Manual

4.6.2.3 Consult
Network Service Call Transfer Consult
If this option is selected, you need to announce the transfer after the
transferred-to party answers your call. Then, press the left soft key
(Transfer) to transfer the intended call.
4.6.2.4 Blind & Consult
Network Service Call Transfer Blind & Consult
Select this option to activate both Blind and Consult Call Transfer
functions.

4.6.3 Three Way Call

Network Service Three Way Call
If the Three Way Call function is active, you can make a conference call
with two parties (refer to "Conference Call" on page 22).
After accessing this option, select Enable or Disable to activate or
deactivate the Three Way Call function.

4.6.4 Register Interval Time

Network Service Register Interval Time
This option enables you to set the register interval time.
After accessing this option, enter the interval time (0~86400 seconds),
and then press the left soft key

4.6.5 Caller-ID Block

Network Service Caller-ID Block
If this function is active, when you make a call, your phone number will not
Menu -> Network Service
(Ok) to complete the operation.
73