UTStarcom F1000 User Manual page 74

Menu -> WiFi-Settings
SIP Authentication String
Select this option to set the SIP authentication string.
After accessing this option, enter the authentication string, and press the
left soft key
SIP Password
Select this option to set the SIP password.
After accessing this option, follow the prompt to enter the security code
and press the left soft key
alphanumeric characters), and press the left soft key
complete the operation.
4.5.5.2 RTP
WiFi-Settings Signal Protocol RTP
Select this option to set the RTP protocol.
After you access this option, the RTP Port option will be displayed.
RTP Port
This option enables you to set the RTP port.
After accessing this option, key in the RTP port number (10000~20000),
and press the left soft key
The port number should range from 10000 to 20000; otherwise Illegal
input will be displayed
4.5.5.3 NAT
WiFi-Settings Signal Protocol NAT
Select this option to set the NAT protocol. After you access this option, the
STUN option will be displayed:
70
(Ok) to complete the operation.
(Ok) to complete the operation.
(Ok). Enter the SIP password (0~32
(Ok) to