UTStarcom F1000 User Manual page 51

4.3.6.1 PowerOn Code
If this function is active, the security code will need to be entered each
time you switch on the phone.
After accessing this option, select On or Off to activate or deactivate.
4.3.6.2 Change Code
Select this option to change the security code. Observe the following
steps:
1. When New Code is displayed, enter a new security code (0~6 digits
long, using numbers 0~9), and then press the left soft key
Confirm Code will be displayed.
2. Enter the new security code again and press the left soft key
to complete the operation.
The security code is "888888" by default
If the new security code entered in step 2 is different from that entered
in step 1, when you press the left soft key
be displayed
To avoid any inconvenience, please remember the new security code
4.3.6.3 Reset All
Select this option to restore your phone's default settings.
When you access this option, "Reset All?" will be displayed. Press the
left soft key
This operation will not delete the phonebook entries or call logs. It cannot
change the phone's date and time either.
(Ok) to complete the operation.
Menu -> Settings
(Ok), Not Matched will
(Ok).
(Ok)
47