UTStarcom F1000 User Manual page 33

1. Key in the name, and press the left soft key
You can enter a maximum of 20 alphanumeric characters (refer to
"Input Method" on page 78).
2. Enter the phone number (24 digits maximum), and press the left soft
key (Ok).
The phone number cannot be left blank; otherwise Number Error will
be displayed.
3. Press to highlight the desired group category: Family, Friend,
Colleague, Classmate, VIP, Partner, Others or Blacklist. Press the
left soft key
If the name is not filled in, the phone will use the first 12 digits from the
phone number as the name
The phone number and name of the newly added record cannot be
identical to those of an existing record. Otherwise, the text Exists will
be displayed after you enter the phone number and press the left soft
key (Ok)
The phone will automatically reject any incoming caller whose number
is on the Blacklist. No response will be displayed.
No more entries can be added if the phonebook memory is full. When
Add Entry is selected, the phone will remind you that the phonebook
memory is full
In standby mode, you can add a new entry by entering the phone
number and pressing the left soft key
name and press the left soft key
desired group category and press the left soft key
complete the operation
(Ok) to complete the operation.
Phonebook (Names)
(Ok).
(Save). Then, enter the
(Ok); press to highlight the
(Ok) to
29