Using Terminal Services Client - UTStarcom XV6700 User Manual

6.5 Using Terminal Services Client

Terminal Services Client allows you to log on to a PC running Terminal Services or
Remote Desktop, and use all the resources available on that PC. For example, instead of
running Word Mobile on your XV6700, you can run the PC version of Word and access the
*.doc files available on that PC.
Connect to a Terminal Server
1. On your XV6700, tap Start > Programs > Terminal Services Client.
2. Enter the server name.
3. You can also select a server name in Recent servers if you have recently connected to
a server.
4. Select the Limit size of server desktop to fit on this screen check box if you want to
use programs that have been specifically sized for use with your XV6700.
5. Tap Connect.
The next time the device is turned on, you will be prompted to enter your password.
Navigate within Terminal Services Client
When connected to a remote server, you may notice that your XV6700 screen is displaying
more than one horizontal and vertical scroll bar. Use these scroll bars to either scroll the
contents on the PC, or to scroll the PC display through the Terminal Services Client window.
To make sure you are scrolling the PC display through Terminal Services Client, use the
five directional buttons at the bottom of the Terminal Services Client window. To better fit
information on your XV6700 screen, select the Limit size of server desktop to fit on this
screen check box. For best results, the programs on your desktop PC should be maximized.
Disconnect without ending a session
1. From the Terminal Services Client screen on your XV6700, tap Start > Shutdown.
2. Tap Disconnect.
|
87 Getting Connected