Beam Information Using Bluetooth - UTStarcom XV6700 User Manual

3. Enter a passkey (the same passkey that is entered on the device requesting the
partnership) to establish a secure connection. The passkey must be between 1 and 16
characters.
4. Tap Next.
5. Tap Finish.
You can now exchange information with the other device.
To rename a Bluetooth partnership
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. On the shortcut menu, tap Edit.
4. Enter a new name for the partnership.
5. Tap Save.
To delete a Bluetooth partnership
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. On the shortcut menu, tap Delete.

Beam information using Bluetooth

1. On the device, tap and hold an item to beam. The item can be an appointment in your
calendar, a task, a contact card, or a file.
2. Tap Beam [type of item].
3. Tap the device name to which you want to send the beam. The item is beamed to the
device you selected.
Note If the device you want to beam to does not appear in the box, make sure that it is turned
on, discoverable, and within close range (10 meters) of your XV6700.
|
83 Getting Connected