Table of Contents
Advertisement
Device components
POWER/Backlight
1
Button
2
MiniSD Card Slot
3
Voice Recorder
4
Volume
5
Internet Explorer
6
Infrared Port
7
Antenna
8
Notification LED 1
9
Speaker
10
Notification LED 2
11
Touch Screen
12
Left SOFT KEY
13
START Button
14
OK Button
15
Right SOFT KEY
16
TALK Button
17
NAVIGATION Control
18
END Button
19
Stylus and Stylus Slot
Press to turn your device on/off. Press and hold to turn the backlight
on/off.
Insert a storage card (miniSD card) for storing data.
Press to record a voice note.
Press up or down to adjust the volume.
Press to quickly launch Internet Explorer.
Lets you exchange file(s) or data with other devices wirelessly.
Bi-color LED on the left side: Blue and Green for Bluetooth system
notification of powered-up and ready to transmit radio frequency
signal, and Wi-Fi status.
Listen to a phone call from here.
Bi-color LED on the right side: Green and Orange for CDMA standby,
SMS message, CDMA network status, notification, battery charging
status.
Use to write, draw, or make a selection with the stylus.
Press to perform the command shown in the label above the button.
Press to open the Start menu.
Press to verify your data entries, or to exit the program in use.
Press to perform the command shown in the label above the button.
Press to answer an incoming call or to dial a number. Press and hold to
turn speakerphone on/off.
Press this multi-directional control up, down, left, or right to move
through menus, program instructions; carry out the selection by
pressing ENTER (the center button).
Press to end a call.
Use the stylus to write, draw, or select items on the touch screen.
|
3
Advertisement
Table of Contents
