Installing The Memory Module - Dell NOT22427 Owner's Manual

Steps
1. Using your fingertips, spread apart the securing clips on the memory-module slot until the memory module pops up.
2. Slide and remove the memory module from the memory-module slot on the system board.
NOTE: Repeat step 1 and step 2 if there are more than one memory module installed on your computer.

Installing the memory module

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the memory module and provides a visual representation of the installation
procedure.
Removing and installing Customer Replaceable Units (CRUs) 59