Making A Call Through The Contact List; One-Touch/Two-Touch Dialing - UTStarcom PCS1400 User Manual

ONE-TOUCH/TWO-TOUCH DIALING

Ideal for frequently dialed numbers, this feature allows entries in your
contact list to be dialed via the keypad with only one or two key
presses. In order for One-Touch/Two-Touch Dialing to properly work, it
must be enabled. To activate this function, press
, , then select On or Off using the
Press [Done].
ONE-TOUCH DIALING
2-9: Press and hold the corresponding memory number for more than 1
second.
TWO-TOUCH DIALING
10-99: Press the first digit and second digits of the memory number
short and long respectively.
• If no phone number is stored in the location entered, "Location is
Note
empty" will appear on the screen.
• If One Touch Dial is set to Off:
Enter the speed dial location number then press
• Location 1 is reserved for voicemail.
Location 2-99 are unassigned.
To assign a speed dial location, please see page 38.
MAKING A CALL THROUGH
THE CONTACT LIST
[Menu], ,
.
.
33