Table of Contents
Advertisement
California Proposition 65
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals
known [to the State of California] to cause cancer birth defects or other reproductive harm.
Some examples of these chemicals are:
z Lead from lead-based paints,
z
z Crystalline silica from bricks and cement and other masonry products, and
z
z Arsenic and chromium from chemically-treated lumber.
z
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
Precautions on Use (Make sure to follow the instructions given)
Before using your tool, to avoid personal injury always take the basic precautions explained in later sections.
General Power Tool Safety Warnings
Personal safety
WARNING
z Dress properly.
z
Do not wear loose clothing or jewelry. There is a
danger of being caught in moving parts. Wear a
pair of non-slip shoes. If your hair is long, wear a
protective hair covering to contain your hair.
z Always wear eye protection.
z
Corrective glasses are not considered eye
protection. Always wear appropriate eye
protection.
z Wear a dust mask.
z
When dust is generated in the workplace, wear a
dust mask.
z Use a dust collector or dust collection equipment
z
correctly.
If a dust collector or dust collection equipment are
being used, check that these are connected and
used properly. Use of a dust collector can reduce
risk caused by dust.
z When loud noise is generated in the workplace,
z
wear a hearing protection.
z Do not overreach.
z
Keep proper footing and balance at all times.
z Be on your guard when working.
z
Do not use the tool when you are tired.
When you use the tool, be sure about the handling method, how to work, and pay sufficient attention to the
surrounding environment.
z Never touch the tip of moving parts when the tool is running.
z
Also, do not direct the tip of moving parts toward people or animals.
z Be aware of tool vibration and recoil. Some tools can cause a considerable amount of vibration.
z
Depending on how the product is operated, the type of tool setting, and the length of operation, it could place
a tremendous burden on your hands, arms and body.
The tool could cause a vibration injury or tendonitis. Avoid long-term use and take appropriate breaks.
Consult a doctor if you experience any discomfort or pain while operating the tool.
Protective hair
covering
Dust mask
Work clothing
Safety shoes
EN
Protective
goggles
Earplugs
1
Advertisement
Table of Contents
