Table of Contents
Advertisement
Quick Links
AIR LAPPING TOOL
Please read this manual carefully before you attempt to use
your tool so that you may use it properly and safely.
MICRO AIR HAND
PROFESSIONAL TOOL
Model
Maximum Operating Pressure
Air Consumption (No Load)
Stroke Speed (No Load)
Stroke Length
Shank O.D.
Mass (Weight)
(Include Inlet and Exhaust Hose)
Sound Pressure Level
Sound Power Level
Vibration Level
Thread Size of Air Inlet
Due to continuous product development/improvement the specifications and configurations in
this document are subject to change without prior notice.
Keep the manual handy – so you can use it whenever necessary.
Model MAH-05, MAH-16
Specifications
MAH-05
0.6 MPa
0.07 m
-1
22,000 min
0.5 mm
75 dB (A)
86 dB (A)
2
1.0 m/s
Rc 1/4
Manufactured by :
NITTO KOHKI Co., Ltd.
2-9-4, Nakaikegami, Ohta-ku,
Tokyo, 146-8555, Japan
Tel
Fax
E-mail : overseas@nitto-kohki.co.jp
URL
MAH-16
3
/min
-1
11,000 min
2.2 mm
3 mm
0.4 kg
80 dB (A)
91 dB (A)
2
1.8 m/s
: (81)-3-3755-1111
: (81)-3-3753-8791
: www.nitto-kohki.co.jp
Original Instructions
Advertisement
Table of Contents
Related Manuals for Nitto Kohki MAH-05
Summary of Contents for Nitto Kohki MAH-05
- Page 1 AIR LAPPING TOOL Please read this manual carefully before you attempt to use your tool so that you may use it properly and safely. MICRO AIR HAND Model MAH-05, MAH-16 PROFESSIONAL TOOL Specifications Model MAH-05 MAH-16 Maximum Operating Pressure 0.6 MPa Air Consumption (No Load) 0.07 m...
- Page 2 : Please ask your dealer or ・ 5. OPTIONAL PARTS ……………………………………… 5 distributor for instruction manual in local language(s). 6. OREDERING PARTS …………………………………… 5 7. EXPLODED DIAGRAM: MAH-05, MAH -16 ………… 6 German : Bitte fragen Sie lhren Händler ・ nach eine Betriebsanleitung in Landessprache.
- Page 3 IMPORTANT SAFETY Before Operation INSTRUCTIONS Inspect tool before use. ● Before using, check that screws are securely When using the tool, please take the basic safety tightened, that a protective cover and other parts precautions as described below to prevent possible are free from damage, and that the tool runs as it injury.
- Page 4 GENERAL: PNEUMATIC Maintenance/service TOOLS Do not take apart or modify tool. ● Disassembling or modification carried out without Warning the supervision by a qualified or authorized service engineer might cause accident. Use appropriate air pressure. ● Inspect cutting tool and accessories, etc. ● ...
- Page 5 MAH-05 INSTRUCTIONS FOR Package Contents Q’ty THIS TOOL MICRO AIR HAND MAH-05 1set Flat Electro-Plated File #140 Warning Rat-Tail Electro-Plated File #140 Hex. Socket Screw Key 2 Wear protective glasses and a dustproof mask ● Bushing R1/4xNPT1/4 Operation generates chips and dust particles, etc.
- Page 6 3-3. Lubrication 4-3. Grinding and polishing operations Install an oiler between the compressor and the tool. Warning Use the machine oil ISO VG-10. Failure to lubricate as required may result in damage to the tool. Use of Be sure to wear protective glasses and a ●...
- Page 7 7. EXPLODED DIAGRAM: MAH-05 and MAH-16 PARTS LIST Warning This diagram is for refrence only. Do not attempt to service or repair the Tool. Do not take the Tool apart. Contact an authorized Nitto dealer for all service and repair of the Tool.
-
Page 8: Ec Declaration Of Conformity
Tel: (65)-6227-5360 Fax:(65)-6227-0192 http://www.nitto-kohki.co.jp/e/nksb/ NITTO KOHKI EUROPE Co., Ltd. Unit 21, Empire Centre, Imperial Way, NITTO KOHKI Co., Ltd. Shanghai Representative Office Watford Hertfordshire, WD24 4TS, United Kingdom #1117 Ruijing Building, Maoming South Road, Shanghai 200020 China Tel: (44)-01923-239668 Fax:(44)-01923-248815 http://www.nitto.co.uk/...
Need help?
Do you have a question about the MAH-05 and is the answer not in the manual?
Questions and answers