(Optional Parts) (Fig. 3); How To Operate The Tool; Start And Stop (Fig. 2) - Nitto Kohki Super Hand ASH-900 Instruction Manual

EN

5 How to Operate the Tool

WARNING
z Always wear eye protection during operations. Start the operation and press the tool slightly to the workpiece. z
z Even if the tool is strongly pressed, the filing efficiency cannot be improved. z

Start and Stop (Fig. 2)

To start: Turn the Valve Ring clockwise and align " ▲ " with "ON" on the Housing.
To stop: Turn the Valve Ring counterclockwise and align " ▲ " with "OFF" on the Housing.
How to use the Sanding Pad (Optional Parts) (Fig. 3)
1
Attach the Abrasive Paper on the sponge of Sanding Pad and fix it with the Paper Clamp as shown on the
Fig. 3.
2
Mount the Sanding Pad in the Same manner as the one for the file and carry out operation.
3
Cut the locally available Abrasive Paper 20 mm x 190 mm size and use it.
Caution: The Sanding Pad may cause the larger vibration of the tool than the one caused by the file.
①
②
12
①
②
ON
OFF
Fix the Abrasive Paper
on the Sponge
③
A
Hang the A point of
Paper Clamp to the Shank
Hang it to the Shank
① Housing
② Valve Ring
Fig. 2
① Sponge
② Abrasive Paper
③ Paper Clamp
Fig. 3