ACTUATOR REMOVAL
Step 7�
Remove the retaining clip on the damper linkage to remove the
damper shaft bracket.
Step 8�
Disconnect the damper linkage, and remove the damper shaft
bracket.
Step 9�
Remove the retaining clip from the back of the actuator.
18
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 32: Removing the Retaining Clip on the Damper Linkage.
Figure 33: Disconnecting the Damper Linkage; Removing the Damper
Shaft Bracket.
Figure 34: Removing the Actuator Retaining Clip.