LG ARNU363DDA4 Installation Manual page 17

Step 4�
Unscrew the two (2) screws on the bracket that hold the actuator
linkage, and then remove the bracket.
Step 5�
Remove the spring clip from the damper shaft.
Step 6�
Remove the bolt on the linkage bracket and damper shaft.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
ACTUATOR REMOVAL
Figure 29: Removing the Actuator Bracket.
Figure 30: Removing the Actuator Bracket.
Figure 31: Removing the Bolt on the Actuator Linkage Bracket / Damper
Shaft.
17