LG ARNU363DDA4 Installation Manual page 15

Step 15�
Route the UL-approved line voltage cable from the power exhaust through the LG Split RTU to its control box.
Figure 22: UL Approved Line Voltage Cable.
Step 16�
MAMAC SYSTEMS® pressure transmitter is coupled to the power
exhaust and connected to the motor controller via the variable
frequency drive Hitachi NE-S1 Inverter. It is to be placed at a loca-
®
tion that detects pressure within the space for differential pressure
control (high-side).
(MAMAC SYSTEMS is a registered trademark of MAMAC SYSTEMS,
Inc.
Hitachi is a registered trademark of Hitachi, Ltd.)
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
UNIT INSTALLATION
Figure 23: UL Approved Line Voltage Cable Terminals.
Figure 24: Pressure Transmitter.
15