Hisense HRM260N6TSE User's Operation Manual page 16

Table of Contents

Advertisement

Available languages

Available languages

"VersaTemp"
You can touch the "VersaTemp" button
to activate the mode to control the
convertible compartment temperature.
When you press the button
continuously, the temperature will be
set in the following sequence.
41°F
40°F
27°F
28°F
5°C
4°C
-3°C
When the Child Lock is on, the dispenser
will not work. When the Child Lock is off,
you can press the "Cubed" or "Crushed"
option to choose the type of ice to be
dispensed, and press the "Water" button
will activate the water mode. If you
choose the function of Cubed, the "
icon will be illuminated, choose the
fuction of Crushed the "
illuminated, and the "
illuminated when Water function is
chosen.
" °F/°C "
When the Child Lock is off, you can
touch the"°F/°C" button to switch
between Celsius and Fahrenheit units.
The default state is Fahrenheit display.
When it is switched to Fahrenheit, the
icon "
" will be on.
39°F
......
29°F
3°C
......
-2°C
-1°C
"Dispenser
Control"
" icon will be
" icon will be
"ECO/Energy Saving"
You can touch this button to turn
Energy Save mode on and off. When
you turn Energy Save on, the Eco icon
"
" lights. The temperature of the
fridge is automatically switched to
43°F(6°C) and the freezer to 1°F(-17°C). If
Energy Save is off, the icon "
off and the temperature setting will
revert back to the previous setting.
"Water Filter"
In general, you should change the
water filter every 6 months to ensure the
highest possible water quality.
After the refrigerator has dispensed
about 200 gallons of water, the filter
icon "
" will blink, reminding you to
replace the water filter.
"
You can purchase the new filter from
the retailer where you purchased your
refrigerator or the Hisense after-sales
service system. Make sure that the new
filter is the same filter type that came
with your fridge and can be correctly
used in your refrigerator. After you
change the water filter, touch and hold
the "Eco" buttons for 3 seconds to make
the blinking stop.
"Demo Mode"
Demo mode is for store display, and it
prevents the refrigerator from
generating cool air. In this Demo Mode,
" will go
16

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents