Panel Operation - DAYLIFF SUNVERTER 4 Installation & Operating Manual

Indicator Lights &
Keys
>>
PROG
ENTER

4.3 Panel Operation

There are 3 kinds of status for operating panel display: running data display,
control parameter display and warning code display. The default status is the
running data display. Press the
display, and press the key again to return the default status.
Press key to return to the default running data display status.
MODE
4.4 View Running Data
Name
Right Shift Key
Programming Key
Enter Key
PROG
4 21
Function
Switch the display data type of PV input/AC input
Output/ Others when viewing running data
Shift right to switch the bit to be edited.
Enter or quit from the display status of the control
parameter
1. Confirm the content to be viewed or edited
2. Confirm and save the parameter value when the
parameter is edited
key to enter the status of control parameter