Functional Description; Technical Data; Chapter 2 Installation And Commissioning; General Installation Instructions - Helios AIR1-SM DX Installation And Operating Instructions Manual

Installation and Operating Instructions
EN
m
CAUTION
CHAPTER 2
INSTALLATION AND
COMMISSIONING
m
CAUTION
Control module AIR1-SM DX
15

Functional description

The control module DX is used to connect the control system of the AIR1 ventilation unit specified in point 1.4 with the
control system of the on-site cooling system. The available input and output signals from and to the cooling system as
well as the connection between the AIR1-SM DX control module and the AIR1 ventilation unit can be seen in the wiring
diagram chapter 2.7.5.
The control module DX can only be operated in conjunction with a AIR1 ventilation unit (with software version
37-1-30 or higher)
16

Technical Data

Voltage :
Frequency:
Current:
21

General installation instructions

211 Dimensions

For correct installation of the control modul DX, use the external brackets (➊) supplied for wall mounting (see
Fig2)
22

Receipt

Please check delivery immediately on receipt for accuracy and damage. If damaged, please notify the carrier immedia-
tely. In case of delayed notification, any possible claim may be void.
AC 230 V
50-60 Hz
max. 0,33 A
205
112
➊
3
Dim. in mm
Dim. in mm
Fig1
Fig2