Swann Smith's Caspian UVC EC Series Installation, Commissioning And User Manual page 18

Changing from offline
mode to online mode
If you want to use the internet App and the
Universal Gateway Hub UG600 (available as an
accessory product code: HACA33130), you need
to change your thermostat settings from offline
mode to online mode. For that please follow the
steps below:
1
M
Press OK once then press and hold 3 buttons
for 2 seconds.
3
M
The digits on the screen will flash. Using the up/
down keys enter pass 55 then click OK.
5
M
Press Ok and then short press button to
confirm pairing.
18 | SmithsEP.co.uk | Issue 001 - October 2023
2
M
4
M
6
M
Scan for equipment
Press
follow the on screen instructions.
7
Set up your device
on the App.
2 Sec
Note: To view detail of set up, operation and
parameters, please consult the full manual at:
2 Sec
https://salus-controls.com/uk/product/fc600/#downloads
2 Sec
Temporary override
To temporarily override and cause the heater to
function follow steps 1-5. This should be used
during the commissioning process.
1
3
4
from the App and
8
M
You're now in
Standby Mode.
2
M
Note: The temporary
override will be
active until the next
program starts.
You can cancel the
temporary Override
M
by pressing
M
5
M
M
M
M