Table of Contents
Advertisement
Mounting Options
Bottom
Exploded diagram with base unit shown in centre laying on its back, all other parts available separately
Fix the unit to the ceiling or wall via suitable
fixings. If fitted to suspended ceilings or similar
then suitable means of support such as threaded
rods or chains must be used.
The unit may be orientated so that the discharge
blows up or downwards to suit installation
requirements.
To ensure long term function ensure the unit is
installed in the horizontal plane – running in the
vertical plane may reduce fan life.
10 | SmithsEP.co.uk | Issue 001 - October 2023
C
B
A
Back
Optional extras and accessories
Air Inlet: air inlet should be through one of 3
options (front, bottom, back inlet) shown in blue
If air inlet is not through the front of the unit the
filter retainer should be moved to the required
position
Air Outlet: air outlet must always be through the
top of the unit shown in red.
By fitting optional equipment this product can
operate automatically under normal running
conditions. The optional controls fit within the
casing of the unit and are supplied with easy to fit
instructions.
Top
Advertisement
Table of Contents
