Table of Contents
Advertisement
Inlet / Outlet Ducting & Grilles
Straight 1 Metre Duct
(Marked as "A" in exploded diagram, See page 10)
A Straight 1 Metre duct for either inlet/ outlet of the product.
May be cut to size if necessary. Available sizes (90/120/150 &180)
90 Degree Duct
(Marked as "B" in exploded diagram, See page 10)
A 90 degree duct used to turn entering/ exiting air of the product, for either inlet/outlet.
Available sizes (90/120/150 &180)
200mm Spigot Adaptor (Marked as "C" in exploded diagram, See page 10)
Spigot adaptor that will fit either directly to the heater or an accessory duct.
Size 90 x 2 Spigots, Size 120 x 3 Spigots, Size 150 x 4 spigots and size 180 x 5 spigots
Punched Steel Grille
Punched steel grille for either inlet/ outlet. Painted in white polyester powder coat (RAL
9010). Available sizes (90/120/150 &180)
Aluminium Linear Grille
Aluminium framed louvre grille for either inlet/ outlet. Available sizes (90/120/150 &180)
Electrical Controls
Proportional Heat Output controller
As the room temperature increases to a comfortable temperature the fan speed of the
unit will reduce. This replaces the standard unit controller. (This controller is pre-set and
non-adjustable)
External Control Harness
Allows for the standard unit controller to be relocated externally from the heater
Adjustable low temperature cut-out
This enables the end user to precisely select the temperature at which the fans will switch
on when combined with different heat sources.
Wall Mounted Controller
This enables the end user to control the fan speed from a wall mounted control.
Miscellaneous
Caspian 22mm Flexible Hoses
Replacement air inlet filters for all models. Available in two sizes (90/ 120)
For accessories or spares please contact either your supplier or Smith's Environmental Products Ltd.
Issue 001 - October 2023 | SmithsEP.co.uk | 11
STR1MDCT
90DEGDCT
200SGAD
PSG
ALG
PHOC
EXTCH
ALTC T3
WMCEC
CAS22FH
Advertisement
Table of Contents
