Table of Contents
Advertisement
Setting the Clock
Setting the clock is divided into three sections; Set the Time Zone, Set the Daylight
Saving Time, and Set the Date and Time. Please follow instructions in the order
presented.
wm i kanin
Set the Time Zone
The Palmcorder is set to the Eastern
Before you begin...
• Connect the Palmcorder to a power source.
• Set the POWER switch to VCR or CAMERA.
Standard time zone at the factory. If you
live in a different time zone, follow the
steps below to change it. Then, when
traveling, rather than resetting the clock to
the local time, you can simply set the
appropriate time zone.
Note:-
CLOCK SET menu disappears if, after
activation, CLOCK SET UP
A,
DOWN ▼ or
DISPLAY buttons are not pressed within 30
seconds.
The Palmcorder's clock may lose or gain up
to two minutes per month. Please adjust as
necessary (refer to page 13).
Press CLOCK SET UP ▲ to display
the CLOCK SET menu.
>
' Press UP
A
or DOWN
T
repeatedly
to select1=1 from
the CLOCK SET menu.
3. DATEmME SETTING
4. END
SELECT: PUSH T/i KEY
I SET
: PUSH display key
Press
DISPLAY to display the
SELECT TIME ZONE menu.
••.soect time zoic...
ATLANTIC
PACIFIC
ALASKA
CENTRAL
HAWAII
MOUNTAIN
SAMOA
SELECT: PUSH
T/A
KEY
i SET
: PUSH DISPLAY KEY
Press UP
A
or DOWN
T
repeatedly
Time Zone chart
to select one of the eight time zones of
the location where you are using the
Palmcorder.
Press DISPLAY
to fix the Time Zone.
The CLOCK SET menu appears.
To exit from the CLOCK SET
menu,
select
and press
DISPLAY.
Note:-
When you travel outside the eight time
zones right, please set the clock
manually (see page 13).
11
Advertisement
Table of Contents
