Dialing a Stored Number
To dial a number previously stored in memory, follow these steps:
HANDSET
Remove the Handset from the
Base Unit.
The speaker LED lights.
A
Press
M
Press
Press the memory location number
(0-9) you want dialed.
Chain Dialing
On certain occasions, after dialing a number, you may be requested by the
party or service you are calling to enter a special access code, such as when
performing a banking transaction. To do this, simply:
1. Store the access code into one of the memory numbers.
2. Dial the main number.
3. At the appropriate time, press
number where the access code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory location, follow these
steps:
HANDSET
Remove the Handset from the
Base Unit.
M
twice
Press
Press the memory location number
(0-9).
Note:
An error tone will sound and the erase procedure will be canceled if
more than 20 seconds elapse between each keystroke entry or
step.
.
speaker
Press
M
Press
Press the memory location number
(0-9) you want dialed.
M
followed by the memory location
M
Press
twice .
Press the memory location number
(0-9).
41
BASE UNIT
BASE UNIT