Dialing A Stored Number; Chain Dialing - Uniden EXP95I Important Safety Instructions Manual

Dialing a Stored Number

To dial a number previously stored in memory, press T , then
press MEM and the memory number (0-9). Your EXP95/97 will
then dial the previously stored number.
Note: If you select a memory location that does not have a stored
number, the Handset will beep rapidly and will not dial.

Chain Dialing

On certain occasions, after dialing a number, you may be
requested by the party or service you are calling to enter a
special access code, such as when performing a banking
transaction.
1. Store the access code in one of the memory numbers.
2. Dial the main number.
3. Press MEM and the memory number of the access code at the
appropriate time.
30