Uniden XC645 User Manual page 30

3. Wait 5 seconds then place
the Handset on the Base
Unit.
The charge LED will blink
quickly, indicating that the
Code has changed.
If the Base Unit loses power while the Handset is off the Base, the Digital
Code may be erased. When this happens, the Handset will not function. To
reestablish communication between the Handset and Base Unit:
1. Restore power to the Base
Unit.
2. Place the Handset back on
the Base Unit.
charge
3. The
quickly, indicating that the
Digital Security Code has
been reset.
LED will blink
30
25
CHANNEL
charge
1
4
ghi
7
pqrs
mem