WARNING
When cleaning battery
contacts, DO NOT use any
liquids or solvents.
RINGER ON OR OFF
The ringer is on when the switch
is in the RING ON position. To
turn off the ringer, move the
switch to the BATT SAVE
position. Now, when a call comes
in, the
LED will flash but the
talk
ringer will be silent.
PAGE/FIND
To locate the handset
(while it's off the base),
press
on the
page/find
base. The handset beeps
for about 6 seconds.
ATTACHING THE BELTCLIP
1) Put the tab (at the belt clip top)
into the notch at the top of
handset back.
2) Snap the bottom tabs into both
CLIP notches until secure.
CLEANING BATTERY CONTACTS
To maintain a good charge,
clean all charging contacts
on the handset and base
about once a month.
Use a pencil eraser or other
contact cleaner. DO NOT use
any liquids or solvents.
9