Troubleshooting; Range - Uniden EXP95I Important Safety Instructions Manual

900 mhz cordless phone
Hide thumbs Also See for EXP95I:
Table of Contents

Advertisement

If your EXP95/97 Cordless Telephone is not performing to your
expectations, please try these simple steps. If you are still unable
to resolve the problems, contact your place of purchase.
Note: Do not attempt to service this unit yourself. All service must
be done by qualified service personnel.
Problem
Base Unit Power light does not
come on.
Charge light won't come on when
Handset is placed in Base Unit.
Conversation interrupted
frequently.
Handset doesn't ring.

Range

The EXP95/97 is designed to achieve the maximum possible range
by transmitting and receiving according to the highest
specifications set forth by the FCC. We have rated this phone to
operate at a maximum distance with the qualification that the range
depends upon the environment in which the telephone is used.
Many factors limit range, and it would be impossible to include all
the variables in our rating. The Maximum Range rating of the
EXP95/97 is meant to be used as a means of comparison against
other range claims.

Troubleshooting

Make sure the AC Adapter is plugged into the
Base Unit and wall outlet.
Make sure the AC Adapter is plugged into the
Base Unit and wall outlet.
Make sure the Handset is properly seated in the
Base Unit.
Make sure the Lead Acid Battery Pack is
properly placed in the Handset.
Make sure that the charging contacts on the
Handset and on the Base Unit are clean.
Make sure that the Base Unit antenna is fully
vertical.
Move closer to the Base Unit.
Change Channels.
Lead Acid Battery may be weak or not charged
fully. Charge the Battery Pack for 12-16 hours.
Check the Ringer On setting. It may be on
Ringer Off.
Make sure the Base Unit antenna is fully vertical.
The Handset may be too far away from the Base
Unit.
Check the AC supply.
35
Suggestion

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exp97Exp95

Table of Contents