TTI PL Series Service Manual page 5

Logic Output (PL330 QMT)
Output Voltage Range:
Output Current:
Output Switch:
Output Terminals:
Over-Voltage Protection:
Output Protection:
Load Regulation:
Line Regulation:
Remote Sense:
Ripple and Noise:
Transient Response:
Temperature Coefficient:
Meter Type:
Meter Resolution:
Voltage:
Current:
Meter Accuracy:
Logic Output (PL320 QMT)
Output Voltage Range:
Output Current:
Output Switch:
Output Terminals:
Over-Voltage Protection:
Output Protection:
Load Regulation:
Line Regulation:
Remote Sense:
Ripple and Noise:
Transient Response:
Temperature Coefficient:
Voltage Setting Accuracy:
4
4 to 6 Volts
0.1 to 7 Amps.
Electronic
4mm terminals on 19mm (.75") spacing.
Above 7 Volts
Clamped by the over-voltage protection circuit for forward voltages
over 7 Volts and up to 1 Amp forward current. Diode clamped for
reverse voltages and up to 3 Amps reverse current.
<0.01% of maximum output for 90% load change
<0.01% of maximum output for 10% line voltage change
Eliminates up to 0.5V drop per lead
Typically <1mV rms
<20usec to within 50mV of setting for 90% load change
Typically <100ppm/°C
3.75 digit (4095 count) with 12.5mm (0.5") LEDs. Reading rate 4 per
second.
10mV
10mA
0.5% of reading + 1 digit
4 to 6 Volts
0.1 to 4 Amps.
Electronic
4mm terminals on 19mm (.75") spacing.
Above 7 Volts
Clamped by the over-voltage protection circuit for forward voltages
over 7 Volts and up to 1 Amp forward current. Diode clamped for
reverse voltages and up to 3 Amps reverse current.
<0.01% of maximum output for 90% load change
<0.01% of maximum output for 10% line voltage change
Eliminates up to 0.5V drop per lead
Typically <1mV rms
<20usec to within 50mV of setting for 90% load change
Typically <100ppm/°C
Better than ± 0.1V